Detailed Product Description:
Loctite 7471 (Primer T) is used where increased cure speed of Loctite anaerobic
adhesives is required. Primer T is similar to Primer N but slower. Fixturing time
for Primer T is approximately 30 minutes compared to a fixturing time of 30 seconds
for Primer N.
It is especially recommended for applications with passive metals or inert surfaces
(such as in the case of stainless steel or aluminum alloys) and with large bond gaps.
Also recommended when cure temperature is low (below 15˚C).
Primer-T is essentially a carrier solvent (acetone) in which the surface activating
chemicals are dissolved. This carrier solvent also serves as an effective degreaser
to prepare the surface for bonding.
Flammable. Contains Acetone solvent and propane/isobutane for aerosol propellant.
Not recommended for use in pure oxygen and/or oxygen rich systems and should
not be selected with a sealant for chlorine or other strong oxidizing materials.
Under no circumstances should activator and adhesive be mixed directly as liquids.
Use only in a well-ventilated area.
Loctite Primer T comes packed in a 4 ounce aerosol spray can.